PGT 100 Personnel Grounding Tester
The PGT100 wrist strap and footwear tester, performs a quick test to
assure whether wrist straps and footwear are conductive within acceptable
limits.
Calibration Unit
Includes all the resistances needed for testing the PGT100 upper and
lower limits.
Safety Pips
Continuous wrist strap monitor.
Test method: Impedance
Test range: 900 kohm ... (100 pF + 2 Mohm) OK testing
Signal: Audible and visible
Operation: Battery operated
PGT 2000 Personnel Grounding Tester
Measures personnel grounding including user's identification and test
values documentation (required by DIN EN ISO 9000 for example).
Simultaneous measurement of wrist strap and footwear according to DIN
EN 61340-5-1
Measurement takes < 1,5 seconds for personnel identification, wrist
strap and footwear tests
Transponder personnel identification system
Access control of protected zones and EPA's with door opener
Audible and visible test signal
Configurable test voltage and resistance values
Data transfer and configuration via RS232 or Ethernet network card
Integral memory for saving personnel data and test values
Network connection of up to 64 units possible
Calibration Unit
Includes all the resistances needed for testing the PGT2000 upper and
lower limits.
SRM110
Pocket size, lightweight resistance tester.
Integral parallel electrodes
Use of external electrodes is possible via 4mm banana plugs
100 V / 10 V automatic test voltage
Test range: 10^3 to 10^12 ohm
Test voltage: 10V / 100V
Display: 12 dots LED bar graph display
Operation: Battery operated
Probes: Built in parallel electrodes
Dimensions: 130 x 65 x 31 mm
|